Looking for a reliable oil burner pump screen to improve fuel flow and reduce clogs? This guide highlights five top options that commonly fit Suntec, Beckett, Riello, and Melling pumps. Each pick targets different needs, from affordable replacement kits to high-demand screens for US-made pumps. Worst-case scenarios like frequent cleaning or partial blockages are addressed with clear buying notes. This overview helps homeowners, technicians, and do-it-yourselfers choose the right screen for their oil burner system.
Overview at a glance: the following products are selected for compatibility with common oil burner pumps and screen assemblies. For quick reference, the table below lists each item and its primary focus.
| Product | Best For | Key Benefit |
|---|---|---|
| A2VA7116 A2EA6520 Strainer Kits – for Suntec -Beckett Oil Burner 2 Pack | Beckett/Suntec kits | Two-pack for easy replacement |
| (3) Strainer Kits Suntec, Beckett Oil Burner Includes Gaskets A2VA7116 A2EA6520 | Beckett/Suntec gasketed kits | Includes gaskets for quick seal |
| Strainer Kit Suntec, Beckett Oil Burner Pump Includes Gasket A2VA7116 A2EA6520 | Beckett/Suntec with gasket | All-in-one replacement |
| Melling 324S Oil Pump Screen | US-made pump screens | Galvanized steel, 0.70 inch I.D. |
| Riello Pump Strainer Screen 126G P193-126G 3005719 | Riello models | Replaces part 3005719 with gasket and O-ring |
A2VA7116 A2EA6520 Strainer Kits — Suntec/Beckett (2 Pack)
Reference features: Replacement model A2VA7116 A2EA6520; compatible with SSC 109 3715101 RS939 A2VA-7116 A2EA-6520 A1VA-7112; kit size 2.4″ wide, 2.75″ tall; hole spacing 1-7/8″ x 2-1/4″. Includes easy installation steps and clean-before-install guidance.
Best for: technicians and homeowners replacing worn strainers in Suntec or Beckett systems. This two-pack provides redundancy and cost efficiency for regular maintenance schedules.
Limitations: may require matching with existing gasket sizes; confirm your model before purchasing if your system uses a different variant.
(3) Strainer Kits Suntec, Beckett Oil Burner Includes Gaskets
Features: Strainer kits for Suntec/Beckett oil burners, includes gaskets. Replacement model A2VA7116 A2EA6520 compatible with common pump assemblies; simple to install with included seals.
Best for: users who want a gasket-inclusive kit ready to seal and protect the pump. Choose this when you need a quick, complete replacement set with seals.
Limitations: ensure gasket style matches your pump flange; older units may use non-standard seals.
Strainer Kit Suntec, Beckett Oil Burner Pump Includes Gasket
Reference features: Includes a gasket; designed for Suntec and Beckett oil burners. Model A2VA7116 A2EA6520 compatibility ensures broad pump coverage.
Best for: those seeking a single-kit solution with gasket for sealing pressure and preventing leaks. It’s a practical option for mid-season replacements.
Limitations: check your exact pump model for compatibility with the A2VA7116 series; misalignment can affect operation.
Melling 324S Oil Pump Screen
Reference features: Galvanized steel; made in the USA; 0.70 inch inner diameter. This screen is designed for compatibility with Melling pump assemblies and offers sturdy construction.
Best for: customers using Melling pumps who need a durable, US-made screen with a precise I.D. suitable for standard Melling interfaces.
Limitations: verify exact diameter and fit on your pump before ordering; variant screens may use different I.D. measurements.
Riello Pump Strainer Screen 126G P193-126G
Reference features: Pump strainer screen with gasket and O-ring; replaces part number 3005719; designed to fit Riello burners with factory pumps.
Best for: Riello system owners who need a direct replacement that includes both gasket and O-ring for a tight seal.
Limitations: fits Riello factory-pump configurations; not universal for non-Riello models without adapter hardware.
Buying Guide: Key Considerations for Oil Burner Pump Screens
What screen size and material matter? Look for galvanized steel or corrosion-resistant materials for longevity. Confirm inner diameter and hole pattern to match your pump’s intake and flow path. Always check compatibility with your burner brand (Beckett, Suntec, Riello, Melling) and model number.
Gaskets and seals: Kits that include gaskets or O-rings simplify installation and reduce leaks. If a kit arrives without seals, source the correct gasket type separately to ensure a proper seal.
Replacement frequency: If your system runs hot or if you burn dirty fuel, screens may clog faster. Consider a multi-pack or kit that allows quick reselection during service windows to minimize downtime.
Installation simplicity: Choose products labeled as easy to install with clear instructions. Some kits require cleaning the pump beforehand to remove debris that could affect new screens.
Availability and compatibility: For older systems, verify that the part numbers (A2VA7116, A2EA6520, 3005719) align with your pump’s specifications. When in doubt, consult your burner’s manufacturer documentation or a professional technician.
FAQ
- What is a pump screen used for in an oil burner? It filters out debris before fuel reaches the pump, protecting the pump rotor and improving efficiency.
- How do I know which screen fits my burner? Check your pump model number, manufacturer (Beckett, Suntec, Riello, Melling), and the inner diameter of the screen. Match part numbers when possible.
- Should I replace the gasket when I install a new screen? Yes. Replacing the gasket ensures a proper seal and reduces the risk of leaks.
- Can I reuse an old gasket? It’s not recommended. Worn gaskets can fail under pressure and cause leaks or air intrusion.
- Is a two-pack of strainers better than a single pack? A two-pack provides redundancy, reduces downtime during maintenance, and is cost-effective for frequent service intervals.
- Are these screens compatible with all oil burners? No. Compatibility depends on brand, model, and pump type. Always verify with the specific model numbers listed by the manufacturer.