Buyers replacing a Goodman evaporator coil typically pay between $450 and $2,200 depending on coil size, equipment compatibility, and installation complexity; common total prices cluster near $950-$1,350. This article lists Goodman evaporator coil cost ranges, per-unit pricing, and the main drivers that affect the final price so readers can compare quotes accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Goodman Evaporator Coil Unit | $250 | $450-$650 | $1,000 | Assumptions: residential A-coil, standard copper/aluminum, common sizes |
| Installed Replacement (single-stage) | $450 | $950-$1,350 | $2,200 | Assumptions: includes labor, refrigerant if needed, normal access |
| Installed Replacement (matched OEM/scroll) | $700 | $1,250-$1,800 | $2,800 | Assumptions: matched TXV, higher-efficiency coil, difficult access raises labor |
Typical Total Price for a Goodman Evaporator Coil Replacement
The most common installed price for a Goodman evaporator coil replacement in a typical single-family home ranges from $950 to $1,350, with lower DIY-friendly swaps at $450 and complex matched replacements up to $2,200. This range assumes a 1.5–3 ton residential coil, standard sheet-metal cabinet access, and average labor rates.
Assumptions: Midwest labor rates, standard materials, normal access.
Material, Labor, Equipment, and Disposal Pricing
| Materials | Labor | Equipment | Delivery/Disposal | Permits |
|---|---|---|---|---|
| $250-$1,000 (coil unit, TXV, gaskets) | $300-$900 ( typical) | $0-$150 (vacuum pump rental, gauges) | $25-$150 (old coil disposal, refrigerant handling) | $0-$150 (local mechanical permit) |
Material and labor usually split roughly 40%-60% of total installed cost, but high-end coils or hard access can flip that ratio.
How Coil Size, SEER Match, and Furnace Type Change the Quote
Coil capacity, compatibility with the outdoor unit, and whether a TXV or fixed orifice is required are major price drivers. Upgrading from a 1.5 ton to a 3 ton coil typically adds $200-$450 in unit cost and 1-2 extra labor hours.
Specific numeric thresholds: replacing coils for 1.5–2.5 ton systems generally costs $450-$1,100 installed; 3–5 ton residential coils usually cost $750-$1,800 installed. If the coil must be matched to a high-SEER condensing unit (SEER 16+), add $150-$600 for a matched coil or adaptors.
Practical Ways to Reduce Goodman Coil Replacement Price
Control scope: replacing only the coil (not the furnace cabinet or blower) saves $200-$600. Schedule replacements in shoulder seasons (spring/fall) to avoid rush premiums of 10%-25%.
Other tactics: provide clear access to the air handler to cut 1-3 labor hours, accept a standard replacement coil instead of OEM matched when acceptable, and get 3 written quotes to compare markup and warranty terms.
How Long Installation Takes and Typical Labor Rates
Most residential coil swaps require 2-5 hours of technician time for accessible installations and 5-10 hours for difficult access or cabinet modifications. Expect technician rates of $75-$125 per hour and total labor charges of $300-$900.
Example: 3 hours × $95/hr = $285 labor.
Regional Price Differences Across the U.S.
Coil pricing and labor vary by region: metropolitan West/Northeast prices are typically 10%-25% higher than the national average, while Midwest and South are 5%-15% lower. A $1,200 installed job in the Midwest may cost $1,320-$1,500 in the Northeast or West.
Rural areas can add travel minimums ($75-$200) or reduce competition, sometimes raising installed costs by 5%-15% compared with nearby suburbs.
Real-World Quote Examples With Specs and Final Totals
| Scenario | Specs | Labor Hours | Unit Price | Total |
|---|---|---|---|---|
| Budget Replacement | 1.5 ton Goodman A-coil, fixed orifice | 2 | $250 | $450-$550 (simple swap, basic gasket) |
| Standard Install | 2.5 ton coil, TXV, common access | 3 | $450-$600 | $950-$1,300 (includes evacuation and refrigerant) |
| Matched High-Efficiency | 3.5 ton matched coil for SEER 16+, cabinet mod | 6 | $800-$1,000 | $1,800-$2,800 (matched components, extra labor) |
Ask each contractor to itemize unit, labor hours, evacuation time, refrigerant charges, and disposal fees to compare apples-to-apples.