Lloyd air conditioner price varies by model type, capacity, and whether installation is included; buyers typically pay between $180 and $2,200 for common units plus installation fees. This article summarizes what buyers pay for Lloyd window, split, inverter, and portable ACs, and explains the main cost drivers that affect the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Lloyd Window AC (8,000–12,000 BTU) | $180 | $320 | $600 | Packaged unit, no install |
| Lloyd Split AC 1.0–1.5 Ton | $450 | $850 | $1,500 | Indoor+outdoor, basic inverter vs non-inverter |
| Lloyd Split AC 2.0 Ton | $700 | $1,300 | $2,200 | Higher capacity or premium inverter |
| Installation (Split) | $150 | $350 | $600 | Typical single-zone install |
| Portable AC | $220 | $400 | $700 | Includes vent kit |
Average Total Price For Lloyd Split Air Conditioners With Installation
Lloyd split ACs are the most common purchased with professional installation; buyers usually pay a total of $600-$1,700 for a 1.0–1.5 ton system installed and $900-$2,800 for a 2.0 ton installed. Expect the average 1.5-ton Lloyd split with mid-range inverter and standard install to cost about $1,000-$1,250. Assumptions: single-story home, normal access, Midwest labor rates, standard line set up to 25 ft.
Breakdown Of Major Quote Parts: Materials, Labor, Equipment, Permits
Most quotes separate the unit, labor, and accessory charges; understanding each line helps compare bids.
| Materials | Labor | Equipment | Permits |
|---|---|---|---|
| $450-$1,500 (unit cost) | $150-$600 (install labor) | $75-$250 (crane/rigging rental if needed) | $0-$200 (local permits) |
| Line set $150-$350; mounting brackets $20-$80 | $75-$125 per hour | Vacuum pump, gauges included in contractor fee | Condo HOA fees possible |
Materials (unit + line set) and labor are typically 70–90% of the final quote for a standard split install.
How Model Type and Capacity Drive Lloyd AC Price
Capacity and inverter technology are primary drivers: 8,000–12,000 BTU window units run $180-$600; 1.0–1.5 ton splits run $450-$1,500; 2.0 ton splits run $700-$2,200. Choosing inverter models typically adds $150-$800 to the unit price depending on capacity and efficiency.
Site Conditions That Significantly Change The Quote
Site-related variables can add hundreds to thousands: long refrigerant line runs over 25 ft, high wall penetration complexity, or roof/crane work. If the line set exceeds 25–30 ft, expect an extra $150-$500; if over 50 ft, add $400-$1,200.
Practical Ways To Reduce Lloyd Air Conditioner Price
Buyers can lower costs by opting for non-inverter or lower-SEER models, scheduling installs off-peak, providing clear access, and bundling multiple units with one contractor. Typical savings: scheduling in spring/fall vs peak summer can reduce labor markup by 10%–25%.
Regional Price Differences For Lloyd ACs Across The U.S.
Prices vary by region: coastal and metro areas commonly pay 10%–25% more than Midwestern averages; rural markets may face travel minimums. Estimate: Northeast/West Coast +10%–25%, Southeast/Midwest baseline, Rural +5%–15% for contractor travel.
Common Add-Ons, Fees, And Typical Time To Install
Expect add-ons: disposal $50-$150, extra line set materials $150-$350, condensate pumps $80-$250, and diagnostic or service call fees $75-$150. Standard single-zone split installation usually takes 3–6 hours; complex installs can be 8–12 hours.
| Item | Price Range | Typical Time |
|---|---|---|
| Disposal/Old AC removal | $50-$150 | 15–45 minutes |
| Extra line set (over 25 ft) | $150-$1,200 | 30–120 minutes |
| Condensate pump | $80-$250 | 30–60 minutes |
| Permit/inspection | $0-$200 | Varies by locale |
Three Real-World Lloyd AC Quote Examples And What Changed The Price
Example quotes illustrate typical scenarios and line items.
| Scenario | Specs | Labor Hours | Total |
|---|---|---|---|
| Budget Split | 1.0-ton non-inverter, 20 ft line set | 3 hrs | $600-$750 |
| Standard Install | 1.5-ton inverter, 25 ft, includes line set & disposal | 5 hrs | $1,000-$1,400 |
| Complex Multi-Story | 2.0-ton inverter, 60 ft run, crane, permit | 10–12 hrs | $2,200-$3,800 |
Comparing line-item quotes (unit, materials, labor, permits) reveals where savings are possible and prevents surprise charges.