Buyers typically pay $2,500-$8,500 for a PurePro Advantage boiler installed in a U.S. home, depending on capacity, fuel type, and retrofit complexity. This PurePro Advantage boiler price summary shows low, average, and high ranges and the main cost drivers contractors quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| PurePro Advantage Boiler + Basic Install | $2,500 | $4,500 | $8,500 | Assumes 80k–120k BTU, natural gas, easy access |
Typical Total Price For A PurePro Advantage Boiler (80k–120k BTU)
For a standard residential replacement using a PurePro Advantage boiler: equipment alone runs $1,200-$3,200; installation and labor add $1,300-$5,300 for a total of $2,500-$8,500. Assumptions: Midwest labor rates, standard venting, single-family home, direct replacement.
Average jobs fall near $4,500 when replacing an existing gas boiler with minimal piping changes.
Breakdown Of A PurePro Advantage Boiler Quote
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $900-$2,800 | $1,300-$4,000 | $300-$800 (venting, controls) | $50-$300 | $150-$600 |
Materials and labor combined usually account for about 80%-90% of the final invoice.
How Capacity, Venting, And Fuel Change The Final Price
BTU capacity and venting type are major variables: 60k–80k BTU units are $2,500-$4,000 installed, 80k–120k BTU are $3,500-$6,000, and 150k+ BTU commercial installs exceed $7,500. Switching from natural gas to oil or propane can add $400-$1,200 for fuel conversion hardware.
Direct-vent or Category III stainless venting can add $400-$2,000 depending on chase length and roof penetrations.
Practical Ways To Lower PurePro Advantage Boiler Price
Reuse existing piping and controls where safe, schedule during off-peak seasons, and get at least three written quotes to reduce the PurePro Advantage boiler price. Avoid unnecessary upsells like oversized pumps or premium controls unless efficiency needs justify them.
Saving $300-$1,000 is realistic by opting for standard controls, salvaging durable piping, and timing the job outside winter rush.
How Installation Time, Crew Size, And Labor Rates Affect Cost
Typical install time is 4-12 hours for a straight swap and 10-30 hours for complex retrofits. Labor rates vary $75-$150 per hour; a two-person crew at $95/hr for 8 hours adds about $1,520 in labor.
Longer runs, multiple-story access, or oil-to-gas conversions can double labor hours and increase labor cost by $1,000-$3,000.
Add-Ons, Removal, And Permit Fees To Expect
| Item | Typical Range | When It Applies |
|---|---|---|
| Old Boiler Disposal | $100-$400 | Removal and hauling |
| Flue/Vent Modifications | $200-$2,000 | New chimney or chase work |
| Gas Line Upgrade | $150-$800 | Undersized lines or new connection |
| Permits & Inspections | $50-$400 | Local code requirements |
Budget an extra $200-$1,500 for common add-ons when getting quotes to avoid surprises.
Regional Price Differences For PurePro Advantage Boiler Installs
Typical installed prices vary by region: Northeast and West Coast +10% to +25% over the national average, Midwest and South often -5% to -15%. Rural jobs may add travel fees of $100-$400. Assumptions: labor market and permit costs influence deltas.
Expect to pay roughly $500-$1,500 more for the same install in high-cost metro areas versus midwestern suburban markets.
Three Real-World Quote Examples With Specs And Totals
| Scenario | Spec | Labor Hrs | Total Price |
|---|---|---|---|
| Straight Swap, Gas | PurePro 80k BTU, existing vent | 6 | $3,200-$3,800 |
| Retrofit, New Vent | PurePro 120k BTU, new chase vent | 18 | $6,200-$8,100 |
| Fuel Conversion | PurePro 100k BTU, propane conversion kit | 14 | $4,800-$6,500 |
These examples show how venting, conversion, and labor hours push totals across the low-average-high ranges.